You are here : Our Products > Cable Accessories

EPDM Cold Shrink Tubing

DESCRIPTIONS

EPDM Cold shrink tubes are Tubular rubber sleeves which are factory expanded and assembled onto removable core. The core is removed after the tube has been positioned for installation over an in connection, the cold shrink tubing shrink and form a water proof seal. These sizes will cover a range of 1000 volt cables, copper and aluminum conductors. It is in Black color.

DESCRIPTIONS

  • Provides water tight seal upon recovery
  • Excellent mechanical strength
  • Application procedure is quick, simple & clean
  • Covered with thermochromatic paint that change colure upon achieving correct shrink temperature
  • Sleeve can be cut to suit shorter application requirement on site.
  • Stainless steel channel provides permanent closer system

TECHNICAL DETAILS

Physical Properties Test Method Typical Value
100% Modulus ASTM D412-75 1.17MPa
300% Modulus ASTM D412-75
4.7MPa
Dielectric Strength ASTM D149-75
19.1mv/m
Ultimate Tensile Strength ASTM D412-75 11.6MPa
Ultimate elongation ASTM D412-75 635%
Tear Strength ASTM D624C-73 220Pli (38.6N/mm)

TECHNICAL SPECIFICATIONS

Product Code Size Range of cable outer diameter min-max (mm)
2320 Ø 20 8.14 (0.31"-0.55")
2525 Ø 25 10-20(0.39" - 0.79")
2532 Ø 32 12-28 (0.47"-1.10")
2635 Ø 35 14-30 (0.55"-1.18")
2740 Ø 40 17.5-33 (0.69"1.30")
2853 Ø 53 25-46 (0.98"-1.81")
2970 Ø 70 32-65(1.26"-2.56")
3104 Ø 104 43-94(1.69"-3.70")